Reply
Reply
 
Thread Tools Display Modes
frell's Avatar
Old (#1)
I have a gtx 560 ti, this is my exact card




I've never cleaned a graphics card before, but I've had it for 6 months now and I know it's long overdue. Any tips? Is there any risk involved using compressed air?


I've seen people on YouTube with MSI 560s just take the entire case of and clean the heat sink and then put it back on, but I don't think I can do that with this.

Last edited by frell; 06-18-2012 at 09:05 PM..
Offline , card carrying polycounter, 2,172 Posts, Join Date Mar 2010, Location Were I can art  
   Reply With Quote

Kwramm's Avatar
Old (#2)
Can of compressed air and a fine brush (get it in a camera store)
I wouldn't disassemble it though.

If there's too much dust, think of putting your PC somewhere else. Maybe on the desk and not directly on a carpet, for example.
Offline , dedicated polycounter, 1,630 Posts, Join Date Sep 2009, Location Virtuos Games @ Shanghai Send a message via MSN to Kwramm Send a message via Skype™ to Kwramm  
   Reply With Quote

Justin Meisse's Avatar
Old (#3)
compressed air is fine, just keep the can upright and do short bursts - don't dismantle it unless you're comfortable cleaning and reapplying thermal compound.
Offline , Moderator++, 6,717 Posts, Join Date Oct 2004, Location Austin, TX  
   Reply With Quote

The Flying Monk's Avatar
Old (#4)
Quote:
Originally Posted by Kwramm View Post
Can of compressed air and a fine brush (get it in a camera store
I would say that even this is too gentle. a small paint brush (new, you don't want clumps of dry paint getting in there) and an air compressor make short work of all the crap that builds up in PC fans.
Offline , spline, 146 Posts, Join Date Dec 2004, Location Auckland. New Zealand  
   Reply With Quote

Paradan's Avatar
Old (#5)
I used to work for a company that made computers that scanned books and read them in a synth voice for the vision impared.

Anyway, my boss took one of the prototypes home to show to some friends and his cat pissed all over the motherboard. So the computer got kinda stinky. His solution was to take it apart and stick it in the dishwasher. After it had thoroughly dried, he plugged it in and, Voila! It worked perfectly.

I was originally hired as a temp to come in and scan every floppy in the building for viruses, since this guy had infected the company.
Offline , triangle, 280 Posts, Join Date Jun 2011, Location Paso Robles CA  
   Reply With Quote

m4dcow's Avatar
Old (#6)
Make sure you stick something in the fan to stop it spinning so when the compressed air blows it doesn't spin the fan and fuckup the bearings.
Offline , polygon, 748 Posts, Join Date Jan 2010, Location St.Lucia, West indies  
   Reply With Quote

Kwramm's Avatar
Old (#7)
Quote:
Originally Posted by m4dcow View Post
Make sure you stick something in the fan to stop it spinning so when the compressed air blows it doesn't spin the fan and fuckup the bearings.
same reason for using a very fine brush. Don't use any brush that requires scrubbing the dust off and putting pressure on the fan. It can fuck up the bearings, and replacing GFX card fans is annoying. (GFX card noise is annoying too)
Offline , dedicated polycounter, 1,630 Posts, Join Date Sep 2009, Location Virtuos Games @ Shanghai Send a message via MSN to Kwramm Send a message via Skype™ to Kwramm  
   Reply With Quote

frell's Avatar
Old (#8)
Quote:
Originally Posted by Kwramm View Post
Can of compressed air and a fine brush (get it in a camera store)
I wouldn't disassemble it though.

If there's too much dust, think of putting your PC somewhere else. Maybe on the desk and not directly on a carpet, for example.
My computer for tha past month is now about 3ft off the ground. But before this it was on the floor. But the graphics card hasn't been cleaned during any of that while the case filters have



Thanks guys, im just always afraid that I don't have a good brand of compressed air or something and ill ruin it :S
Offline , card carrying polycounter, 2,172 Posts, Join Date Mar 2010, Location Were I can art  
   Reply With Quote

nick2730's Avatar
Old (#9)
6 months isnt a big deal, after a few years you will want to replace the thermal paste.
Offline , polygon, 722 Posts, Join Date Aug 2009, Location http://nickbarone3d.weebly.com/  
   Reply With Quote

Ace-Angel's Avatar
Old (#10)
Threat it like a lady, cool compressed air in the sensitive parts, a swift brush in the more smooth area's followed by a rough motions on the sturdier parts.
There's a very good chance that I experienced MORE problems, then all the internet put together in the area of 3D. Talk about being original for once...
Offline , veteran polycounter, 4,501 Posts, Join Date Apr 2011, Location Canada  
   Reply With Quote

aajohnny's Avatar
Old (#11)
Quote:
Originally Posted by Ace-Angel View Post
Threat it like a lady, cool compressed air in the sensitive parts, a swift brush in the more smooth area's followed by a rough motions on the sturdier parts.
EXACTLY
John Valenti
3d Environment Artist

My Portfolio
Contact Me
Offline , polycounter, 1,140 Posts, Join Date Jul 2010, Location United States Send a message via MSN to aajohnny Send a message via Skype™ to aajohnny  
   Reply With Quote

throttlekitty's Avatar
Old (#12)
Quote:
Originally Posted by nick2730 View Post
6 months isnt a big deal, after a few years you will want to replace the thermal paste.
Depends on where you live, my area gets dusty very quick.
Offline , polycounter, 953 Posts, Join Date Dec 2008, Location South Dakota Send a message via ICQ to throttlekitty Send a message via AIM to throttlekitty Send a message via Yahoo to throttlekitty  
   Reply With Quote

Mark Dygert's Avatar
Old (#13)
Step 1) Use a quality case that has filters over the intake ports.
Step 2) canned air every once in while.

If you ever have a crappy case and wait until something is wrong before cleaning it, throw it all out as soon as possible and do it right.
(AKA Vig) Portfolio | Lab | Brawl | Decker |
Offline , Polycount.com Editor, 13,920 Posts, Join Date Oct 2004, Location Seattle, Wa Send a message via MSN to Mark Dygert  
   Reply With Quote

frell's Avatar
Old (#14)
This is my case



2 intake fans and both have filters, and I clean them about once every month to 5 weeks.


But I had the card before I swapped cases (about 2 months before) I don't think the dust is severe but I can see it on the edge of the fan blades and a little inside on the rim.
Offline , card carrying polycounter, 2,172 Posts, Join Date Mar 2010, Location Were I can art  
   Reply With Quote

metalliandy's Avatar
Old (#15)
Compressed air or similar (I use a pump action fence sprayer, minus the paint) and some cotton buds (Q-tips?) on the fan.
Cuprinol Manual Pump Fence Sprayer: Amazon.co.uk:... Cuprinol Manual Pump Fence Sprayer: Amazon.co.uk:...
Offline , dedicated polycounter, 1,671 Posts, Join Date Mar 2007, Location United Kingdom (Hampshire)  
   Reply With Quote

cptSwing's Avatar
Old (#16)
don't forget the incense while you mumble arcane rites of cleansing.
Offline , polycounter, 1,286 Posts, Join Date Aug 2011, Location Berlin  
   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Copyright 1998-2012 A. Risch