[DS2] Hammer, Pierate

Pierate · Mar 2012

Alright, giving this a shot.

Decided to go for the Maker theme as it's the one i feel the most comfortable with, seems like the others would really benefit from sculpting, which is not my forte.

Anyway, here's where I'm at after a round in photoshop:

Next step would be a blockout in 3D and possibly a paintover, who knows, proportions might change aswell.

And I'm out.

Pierate · Mar 2012

So I went and started blocking out, fixing proportions and getting all the shapes in there.

Not sure how much I'm currently feeling it, but it's still early so I'll give it some more love.

Pierate · Mar 2012

Righto, after realising I wasn't really liking what I had so far I went and drew some silhouettes:

And as you can probably tell I really liked the first one (which I already had mostly worked out in my head), a while later I had this:

Which I personally like a lot more then what I first had

Myrddraal · Mar 2012

i really like the 1st design you had than the newer one :poly122:

r4ptur3 · Mar 2012

nice stuff, feels real solid and heavy!

Alkogolik · Mar 2012

Yes, leave the first version

Pierate · Mar 2012

Righto, got some work done on the 3D version of the hammer, with some changed proportions and bits ofcourse:

And a mockup with Death:

Thanks for the comments guys.

ScoobyDoofus · Mar 2012

Nice start! I'll be watching this one for sure.

Pierate · Mar 2012

@ScoobyDoofus thanks!

Alright, here's what I'm up to:

Quite satisfied with it being my first serious attempt at sculpting.

AimBiZ · Mar 2012

Damn, that's one big crystal! Solid progress. I was about to suggest to add damage and such but you seem to already be on it.

Pierate · Mar 2012

Yeah, definately working on getting some good damage in there.

Next update:

Worked on the crystal/rock thing (there's also some slight damage at the other end) and ended up doing a render.

Habboi · Mar 2012

Looking sweet. I'd continue the damage the crap out of it though.

Pierate · Mar 2012

@Habboi and so I did, well, slightly.

Last update for tonight, pretty big one (image sizewise) aswell, not sure how much further I want to take the sculpting.

ScoobyDoofus · Mar 2012

Remember to try to keep your details big, fairly sharp & readable at a distance.

Pierate · Mar 2012

Good point ScoobyDoofus.

Latest update:

Went over it with fresh eyes, got rid of a lot of noise and tightened it up.

Getting to the point where I'm feeling done with the sculpt, will wait for comments and then go over it another time before moving on though.

kelli · Mar 2012

This looks really good! I think the other side of the hammer looks a little too clean. Even though I know it's not the part being used as much, I think it could use a few more dents/scratches.

tedark1 · Mar 2012

Can't really say anything more about the model than what has been said, but I'm not diggin the color scheme for it. Maybe try a few other iterations of colors and see if you can come up with something a little more maker like? It might just be the purple that throwing it off for me.

Pierate · Mar 2012

@kelli: thanks!

@tedark1: color sheme is not final by any means and I won't give it too much time until its time for textures

Also, a screencap of what the other side of the stone:

Most likely I'll be working a bit more on the cracks and cuts.

Pierate · Mar 2012

Alright, so after further cleaning and tightening of the sculpt I went and did a quick and dirty test bake of the stone:

It's on a 512^2 and it still needs lots of cleaning and optimizing, but it's not too bad so far

JVaughan · Mar 2012

Really nice concepts, and great work in ZBrush too, this is going to look great. I do kind of wonder how much they are going to be looking at the head size. You've gone about 2X but I can understand how much cooler it looks. Great work so far.

AimBiZ · Mar 2012

This coming along quite nicely! I wonder though if the crystal stone would soften up like that through wear and tear. Doesn't look as menacing. I'd rather see it breaking up into smaller spiky shapes. Something like this.

Pierate · Mar 2012

@Jvaughan: Thanks, it's not actually that much off from the proxy, except possibly width-wise, but even so it shouldn't be too hard to change it later on. And it's actually sculptris

@AimBiZ: I see what you mean, although I have no idea what broken crystal actually looks like and I have not yet decided what material I'm going for, I might play around for it a bit though.

Habboi · Mar 2012

Hey, stay away from crystals

That's my gig.

God I hate baking but it looks like yours is coming along nicely.

Pierate · Mar 2012

@Habboi: I'm kinda staying away from crystals. I've got something else in mind so let's see how that works out

Anyway, getting more work done:

512^2 and 1800 tris, I'm happy with it so far.

SgtNasty · Mar 2012

It's hard to say from this angle, but it looks like there is a little gap between the rock/crystal thing and the bracket/bar thing at the top, seems like that should be flush to hold it in place.

Pierate · Mar 2012

Heres how it's put together:

Basically it's held on tightly at the sides.

SgtNasty · Mar 2012

The logic to it makes sense. I think these gaps are just causing visual tension though, rather than being good negative space. It's up to you of course, just a suggestion.

with those parts flush:

Pierate · Mar 2012

It's a good point, I'll play around with tomorrow to see which way I like the best

jmt · Mar 2012

I agree with what sgtnasty said. It looks more tight and solid with those parts flush on the crystal.

Pierate · Mar 2012

So I ended up going with SgtNasty's suggestion and started working a bit on the texture:

Still not too sure on the color sheme though.

Edit: Theres always this possibility also:

[DS2] Hammer, Pierate

Replies