Elizabeth Street - Tram Stop & Carlow House WIP

[Scyfon]

My part of a class collaboration to re-create Elizabeth Street in Melbourne Australia.

I'm responsible for making the tram stops andthe Carlow House building (with Club X)

Le Tram Stop - Front Side
http://i196.photobucket.com/albums/aa229/azrinirza/P1040060.jpg

Chair...
http://i196.photobucket.com/albums/aa229/azrinirza/P1040035.jpg

What I've got so far...

http://i196.photobucket.com/albums/aa229/azrinirza/TramStopRender1.jpg

http://i196.photobucket.com/albums/aa229/azrinirza/TramStopRender2.jpg

[stimpack]

Looks good. Depending on how you plan on texturing this, Alot of this can be modular. So dont kill urself modeling the whole thing right off the bat.

[Scyfon]

Looks good. Depending on how you plan on texturing this, Alot of this can be modular. So dont kill urself modeling the whole thing right off the bat.

Thanks for the tip.
I didn't really intend to model the main body all in one go...it just sorta...happened...
I had to pay the price for it by having to weld an insane amount of poly's though ;_;

[Jackablade]

I'll be interested to see how this comes out. You look to be off to a reasonable start.

Which one's the Carlow building?

[Scyfon]

I'll be interested to see how this comes out. You look to be off to a reasonable start.

Which one's the Carlow building?

It's the one opposite to The Joint/ Duncans.

[Scyfon]

http://i196.photobucket.com/albums/aa229/azrinirza/TramStopRender3.jpg
Started on the seats

[Scyfon]

http://i196.photobucket.com/albums/aa229/azrinirza/TramStopRender4.jpg

Modeled the bolts...ate up quite a bit of the polycount so I had to get rid of them.

Limit is ~3000 polys

[Scyfon]

Completed the tram stop.
http://i196.photobucket.com/albums/aa229/azrinirza/TramStopRender5.jpg

http://i196.photobucket.com/albums/aa229/azrinirza/TramStopRender6.jpg

Next: Carlow House

http://i196.photobucket.com/albums/aa229/azrinirza/IMG_9892.jpg
http://i196.photobucket.com/albums/aa229/azrinirza/P1030989.jpg
http://i196.photobucket.com/albums/aa229/azrinirza/IMG_9846.jpg

[Scyfon]

The whole building is about...97% finished? Just need to work on a few minor details here and there.
http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render1.jpg

Full building shot...I'm not sure whether I'm supposed to model the sides or not though...



http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render6.jpg

http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render7.jpg

http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render8.jpg

http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render9.jpg
Okay, this bit is the one I'm most unsure of...
It's an underground store (strip club)...
Sorta looks weird with it popping out from the bottom like that, but I figure it would be okay once we put it in the ground >_>

http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render4.jpg
The aforementioned store.
Note that I've already fixed that minor triangulation problem after saving this render.

[Scyfon]

A few "final" Renders

http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render16.jpg

http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render17.jpg

http://i196.photobucket.com/albums/aa229/azrinirza/Carlow_House_Render18.jpg